In the last post I showed how we hung the pipes. Notice in this picture that each pipe is suspended by plumbers strap. The reason we did this was to turn the straps completely over so that the adjustments for the raising and lowering of the pipe was not up at the ceiling, but down near the pipe itself. The end that has the adjustment mechanism is rather short and wouldn't go around the diameter of the pipe and still hang on the hook. The plumbers strap solved this problem.
Also note the 3 inch net pot with the drip system in place. We have 66 of these.
This picture looks confusing, but we are looking at a simple drip system. Notice the RO (Reverse Osmosis) filter on the wall. A hose goes from the filter to the big blue barrel. In the big blue barrel is an aquarium heater, an airstone, and a water pump. Look at the manifold. That is the piece that feeds all the different lines to each pipe. We left enough length on each connection so that we can independently raise or lower each pipe. It looks tangled because there are also drain lines coming back from the pipes into the blue barrel. So, simply put, we have a little brown line running along each big green tube with a drip nozzle set up at each planting hole. The water drips in giving nutrition and water(air also) to the roots. Then it all flows back into the big blue barrel. This will be set on a timer to water as needed.
Reverse Osmosis filter.
This big blue barrel, sitting on the table is really important. The RO system is really slow. We're lucky to get 20 gallons a day. Now, the blue barrel on the floor is where I put in my nutrients, and keep full of the filtered water. But you need lots of filtered water. I'll be using the filtered water for the deep wells, which I will explain later (aeroponics), and the simple ebb and flow system and also I use this water for watering houseplants and seedlings. When the barrel on the floor is full, I then start filling the additional barrel resevoir on the table. Notice it has an off and on spout. This allows gravity feed, when needed, to different systems.
Here is a photo of my greenhouse at present. My next post will show the ebb and flow system and the aeroponics system, as they are being made. The gravel on the floor has really turned out to be perfect, because of all the water I've been spilling. I turned on the drip system and there are no leaks! So far, so good. All questions or suggestions are welcome. I just started 75 seeds to be put into the systems soon.
